Table of contents
CSPICE_DASOPW opens a DAS file for writing.
Given:
fname the name of a DAS file to be opened with write access.
[1,c1] = size(fname); char = class(fname)
or
[1,1] = size(fname); cell = class(fname)
the call:
[handle] = cspice_dasopw( fname )
returns:
handle the handle that is associated with the file.
[1,1] = size(handle); int32 = class(handle)
This handle is used to identify the file in subsequent
calls to other DAS routines.
None.
Any numerical results shown for this example may differ between
platforms as the results depend on the SPICE kernels used as input
and the machine specific arithmetic implementation.
1) Create a new DAS file containing 200 integer addresses set
to zero. Re-open the file for write access again, and write
to its addresses 1 through 200 in random-access fashion by
updating the file.
Example code begins here.
function dasopw_ex1()
%
% Local Parameters
%
DASNAM = 'dasopw_ex1.das';
IDATLN = 200;
%
% Open a new DAS file. Reserve no comment records.
%
type = 'TEST';
[handle] = cspice_dasonw( DASNAM, type, 'TEST/DASOPW_EX1', 0 );
%
% Append 200 integers to the file; after the data are
% present, we're free to update it in any order we
% please. (native zeros out an integer array.)
%
idata = zeros( IDATLN, 1, 'int32' );
cspice_dasadi( handle, idata );
%
% Close the file.
%
cspice_dascls( handle );
%
% Open the file again for writing.
%
[handle] = cspice_dasopw( DASNAM );
%
% Read the data from DAS file.
%
[idata] = cspice_dasrdi( handle, 1, IDATLN );
%
% Print the contents of the file before updating it.
%
fprintf( 'Contents of %s before update:\n', DASNAM )
fprintf( '\n' )
for i=0:19
for j=1:10
fprintf( '%5d', idata(i*10+j) )
end
fprintf( '\n' )
end
%
% Now the integer logical addresses 1:200 can be
% written to in random-access fashion. We'll fill them
% in reverse order.
%
for i=IDATLN:-1:1
cspice_dasudi( handle, i, i, i );
end
%
% Close the file.
%
cspice_dascls( handle );
%
% Now make sure that we updated the file properly.
% Open the file for reading and dump the contents
% of the integer logical addresses 1:200.
%
[handle] = cspice_dasopr( DASNAM );
[idata] = cspice_dasrdi( handle, 1, IDATLN );
fprintf( '\n' )
fprintf( 'Contents of %s after update:\n', DASNAM )
fprintf( '\n' )
for i=0:19
for j=1:10
fprintf( '%5d', idata(i*10+j) )
end
fprintf( '\n' )
end
When this program was executed on a Mac/Intel/Octave6.x/64-bit
platform, the output was:
Contents of dasopw_ex1.das before update:
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
Contents of dasopw_ex1.das after update:
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100
101 102 103 104 105 106 107 108 109 110
111 112 113 114 115 116 117 118 119 120
121 122 123 124 125 126 127 128 129 130
131 132 133 134 135 136 137 138 139 140
141 142 143 144 145 146 147 148 149 150
151 152 153 154 155 156 157 158 159 160
161 162 163 164 165 166 167 168 169 170
171 172 173 174 175 176 177 178 179 180
181 182 183 184 185 186 187 188 189 190
191 192 193 194 195 196 197 198 199 200
Note that after run completion, a new DAS file exists in the
output directory.
Most DAS files require only read access. If you do not need to
change the contents of a file, you should open it with cspice_dasopr.
1) If the input filename is blank, an error is signaled by a
routine in the call tree of this routine.
2) If the specified file does not exist, an error is signaled by
a routine in the call tree of this routine.
3) If the specified file has already been opened, either by the
DAS file routines or by other code, an error is signaled by a
routine in the call tree of this routine. Note that this
response is not paralleled by cspice_dasopr, which allows you to open
a DAS file for reading even if it is already open for reading.
4) If the specified file cannot be opened without exceeding the
maximum allowed number of open DAS files, the error
SPICE(DASFTFULL) is signaled by a routine in the call tree of
this routine.
5) If the specified file cannot be opened properly, an error
is signaled by a routine in the call tree of this routine.
6) If the file record cannot be read, an error is signaled by a
routine in the call tree of this routine.
7) If the specified file is not a DAS file, as indicated by the
file's ID word, an error is signaled by a routine in the call
tree of this routine.
8) If no logical units are available, an error is signaled
by a routine in the call tree of this routine.
9) If the input argument `fname' is undefined, an error is
signaled by the Matlab error handling system.
10) If the input argument `fname' is not of the expected type, or
it does not have the expected dimensions and size, an error is
signaled by the Mice interface.
See argument `fname'.
None.
DAS.REQ
MICE.REQ
None.
J. Diaz del Rio (ODC Space)
-Mice Version 1.0.0, 19-JUL-2021 (JDR)
open a DAS file for writing
open a DAS file for write access
|