| spkcpt |
|
Table of contents
Procedure
SPKCPT ( SPK, constant position target state )
SUBROUTINE SPKCPT ( TRGPOS, TRGCTR, TRGREF, ET, OUTREF,
. REFLOC, ABCORR, OBSRVR, STATE, LT )
Abstract
Return the state, relative to a specified observer, of a target
having constant position in a specified reference frame. The
target's position is provided by the calling program rather than
by loaded SPK files.
Required_Reading
FRAMES
PCK
SPK
TIME
Keywords
EPHEMERIS
Declarations
IMPLICIT NONE
INCLUDE 'zzabcorr.inc'
DOUBLE PRECISION TRGPOS ( 3 )
CHARACTER*(*) TRGCTR
CHARACTER*(*) TRGREF
DOUBLE PRECISION ET
CHARACTER*(*) OUTREF
CHARACTER*(*) REFLOC
CHARACTER*(*) ABCORR
CHARACTER*(*) OBSRVR
DOUBLE PRECISION STATE ( 6 )
DOUBLE PRECISION LT
Brief_I/O
VARIABLE I/O DESCRIPTION
-------- --- --------------------------------------------------
TRGPOS I Target position relative to center of motion.
TRGCTR I Center of motion of target.
TRGREF I Frame of target position.
ET I Observation epoch.
OUTREF I Reference frame of output state.
REFLOC I Output reference frame evaluation locus.
ABCORR I Aberration correction.
OBSRVR I Name of observing ephemeris object.
STATE O State of target with respect to observer.
LT O One way light time between target and
observer.
Detailed_Input
TRGPOS is the fixed (constant) geometric position of a
target relative to its "center of motion" TRGCTR,
expressed in the reference frame TRGREF.
Units are always km.
TRGCTR is the name of the center of motion of TRGPOS. The
ephemeris of TRGCTR is provided by loaded SPK files.
Optionally, you may supply the integer ID code for
the object as an integer string. For example both
'MOON' and '301' are legitimate strings that indicate
the moon is the center of motion.
Case and leading and trailing blanks are not
significant in the string TRGCTR.
TRGREF is the name of the reference frame relative to which
the input position TRGPOS is expressed. The target has
constant position relative to its center of motion
in this reference frame.
Case and leading and trailing blanks are not
significant in the string TRGREF.
ET is the ephemeris time at which the state of the
target relative to the observer is to be
computed. ET is expressed as seconds past J2000 TDB.
ET refers to time at the observer's location.
OUTREF is the name of the reference frame with respect to
which the output state is expressed.
When OUTREF is time-dependent (non-inertial), its
orientation relative to the J2000 frame is evaluated
in the manner commanded by the input argument REFLOC
(see description below).
Case and leading and trailing blanks are not
significant in the string OUTREF.
REFLOC is a string indicating the output reference frame
evaluation locus: this is the location associated
with the epoch at which this routine is to evaluate
the orientation, relative to the J2000 frame, of the
output frame OUTREF. The values and meanings of
REFLOC are:
'OBSERVER' Evaluate OUTREF at the observer's
epoch ET.
Normally the locus 'OBSERVER' should
be selected when OUTREF is centered
at the observer.
'TARGET' Evaluate OUTREF at the target epoch;
letting LT be the one-way light time
between the target and observer, the
target epoch is
ET-LT if reception aberration
corrections are used
ET+LT if transmission aberration
corrections are used
ET if no aberration corrections
are used
Normally the locus 'TARGET' should
be selected when OUTREF is TRGREF,
the frame in which the target position
is specified.
'CENTER' Evaluate the frame OUTREF at the epoch
associated its center. This epoch,
which we'll call ETCTR, is determined
as follows:
Let LTCTR be the one-way light time
between the observer and the center
of OUTREF. Then ETCTR is
ET-LTCTR if reception
aberration corrections
are used
ET+LTCTR if transmission
aberration corrections
are used
ET if no aberration
corrections are used
The locus 'CENTER' should be selected
when the user intends to obtain
results compatible with those produced
by SPKEZR.
When OUTREF is inertial, all choices of REFLOC
yield the same results.
Case and leading and trailing blanks are not
significant in the string REFLOC.
ABCORR indicates the aberration corrections to be applied to
the observer-target state to account for one-way
light time and stellar aberration.
ABCORR may be any of the following:
'NONE' Apply no correction. Return the
geometric state of the target
relative to the observer.
The following values of ABCORR apply to the
"reception" case in which photons depart from the
target's location at the light-time corrected epoch
ET-LT and *arrive* at the observer's location at ET:
'LT' Correct for one-way light time (also
called "planetary aberration") using a
Newtonian formulation. This correction
yields the state of the target at the
moment it emitted photons arriving at
the observer at ET.
The light time correction uses an
iterative solution of the light time
equation. The solution invoked by the
'LT' option uses one iteration.
'LT+S' Correct for one-way light time and
stellar aberration using a Newtonian
formulation. This option modifies the
state obtained with the 'LT' option to
account for the observer's velocity
relative to the solar system
barycenter. The result is the apparent
state of the target---the position and
velocity of the target as seen by the
observer.
'CN' Converged Newtonian light time
correction. In solving the light time
equation, the 'CN' correction iterates
until the solution converges.
'CN+S' Converged Newtonian light time
and stellar aberration corrections.
The following values of ABCORR apply to the
"transmission" case in which photons *depart* from
the observer's location at ET and arrive at the
target's location at the light-time corrected epoch
ET+LT:
'XLT' "Transmission" case: correct for
one-way light time using a Newtonian
formulation. This correction yields the
state of the target at the moment it
receives photons emitted from the
observer's location at ET.
'XLT+S' "Transmission" case: correct for
one-way light time and stellar
aberration using a Newtonian
formulation This option modifies the
state obtained with the 'XLT' option to
account for the observer's velocity
relative to the solar system
barycenter. The position component of
the computed target state indicates the
direction that photons emitted from the
observer's location must be "aimed" to
hit the target.
'XCN' "Transmission" case: converged
Newtonian light time correction.
'XCN+S' "Transmission" case: converged
Newtonian light time and stellar
aberration corrections.
Neither special nor general relativistic effects are
accounted for in the aberration corrections applied
by this routine.
Case and leading and trailing blanks are not
significant in the string ABCORR.
OBSRVR is the name of an observing body. Optionally, you
may supply the ID code of the object as an integer
string. For example, both 'EARTH' and '399' are
legitimate strings to supply to indicate the
observer is Earth.
Case and leading and trailing blanks are not
significant in the string OBSRVR.
Detailed_Output
STATE is a Cartesian state vector representing the position
and velocity of the target relative to the specified
observer. STATE is corrected for the specified
aberrations and is expressed with respect to the
reference frame specified by OUTREF. The first three
components of STATE represent the x-, y- and
z-components of the target's position; the last three
components form the corresponding velocity vector.
The position component of STATE points from the
observer's location at ET to the aberration-corrected
location of the target. Note that the sense of the
position vector is independent of the direction of
radiation travel implied by the aberration
correction.
The velocity component of STATE is the derivative
with respect to time of the position component of
STATE.
Units are always km and km/sec.
When STATE is expressed in a time-dependent
(non-inertial) output frame, the orientation of that
frame relative to the J2000 frame is evaluated in the
manner indicated by the input argument REFLOC (see
description above).
LT is the one-way light time between the observer and
target in seconds. If the target state is corrected
for aberrations, then LT is the one-way light time
between the observer and the light time corrected
target location.
Parameters
None.
Exceptions
1) If either the name of the center of motion or the observer
cannot be translated to its NAIF ID code, an error is signaled
by a routine in the call tree of this routine.
2) If the reference frame OUTREF is unrecognized, an error
is signaled by a routine in the call tree of this
routine.
3) If the reference frame TRGREF is unrecognized, an error is
signaled by a routine in the call tree of this routine.
4) If the frame evaluation locus REFLOC is not recognized, an
error is signaled by a routine in the call tree of this
routine.
5) If the loaded kernels provide insufficient data to compute
the requested state vector, an error is signaled
by a routine in the call tree of this routine.
6) If an error occurs while reading an SPK or other kernel file,
the error is signaled by a routine in the call tree of
this routine.
7) If the aberration correction ABCORR is not recognized, an
error is signaled by a routine in the call tree of this
routine.
Files
Appropriate kernels must be loaded by the calling program before
this routine is called.
The following data are required:
- SPK data: ephemeris data for target center and observer
must be loaded. If aberration corrections are used, the
states of target center and observer relative to the solar
system barycenter must be calculable from the available
ephemeris data. Typically ephemeris data are made available
by loading one or more SPK files using FURNSH.
The following data may be required:
- PCK data: if the target frame is a PCK frame, rotation data
for the target frame must be loaded. These may be provided
in a text or binary PCK file.
- Frame data: if a frame definition not built into SPICE is
required, for example to convert the observer-target state
to the output frame, that definition must be available in
the kernel pool. Typically frame definitions are supplied
by loading a frame kernel using FURNSH.
- Additional kernels: if any frame used in this routine's
state computation is a CK frame, then at least one CK and
corresponding SCLK kernel is required. If dynamic frames
are used, additional SPK, PCK, CK, or SCLK kernels may be
required.
In all cases, kernel data are normally loaded once per program
run, NOT every time this routine is called.
Particulars
This routine computes observer-target states for targets whose
trajectories are not provided by SPK files.
Targets supported by this routine must have constant position
with respect to a specified center of motion, expressed in a
caller-specified reference frame. The state of the center of
motion relative to the observer must be computable using
loaded SPK data.
For applications in which the target has non-zero, constant
velocity relative to its center of motion, the SPICELIB routine
SPKCVT { SPK, constant velocity target }
can be used.
This routine is suitable for computing states of landmarks on the
surface of an extended object, as seen by a specified observer,
in cases where no SPK data are available for those landmarks.
This routine's treatment of the output reference frame differs
from that of the principal SPK API routines
SPKEZR
SPKEZ
SPKPOS
SPKEZP
which require both observer and target ephemerides to be provided
by loaded SPK files:
The SPK API routines listed above evaluate the orientation of
the output reference frame (with respect to the J2000 frame)
at an epoch corrected for one-way light time between the
observer and the center of the output frame. When the center
of the output frame is not the target (for example, when the
target is on the surface of Mars and the output frame is
centered at Mars' center), the epoch of evaluation may not
closely match the light-time corrected epoch associated with
the target itself.
This routine allows the caller to dictate how the orientation
of the output reference frame is to be evaluated. The caller
passes to this routine an input string called the output
frame's evaluation "locus." This string specifies the location
associated with the output frame's evaluation epoch. The three
possible values of the locus are
'TARGET'
'OBSERVER'
'CENTER'
The choice of locus has an effect when aberration corrections
are used and the output frame is non-inertial.
When the locus is 'TARGET' and light time corrections are
used, the orientation of the output frame is evaluated at the
epoch obtained by correcting the observation epoch ET for
one-way light time LT. The evaluation epoch will be either
ET-LT or ET+LT for reception or transmission corrections
respectively.
For remote sensing applications where the target is a surface
point on an extended object, and the orientation of that
object should be evaluated at the emission time, the locus
'TARGET' should be used.
When the output frame's orientation should be evaluated at
the observation epoch ET, which is the case when the
output frame is centered at the observer, the locus
'OBSERVER' should be used.
The locus option 'CENTER' is provided for compatibility
with existing SPK state computation APIs such as SPKEZR.
Note that the output frame evaluation locus does not affect
the computation of light time between the target and
observer.
The SPK routines that compute observer-target states for
combinations of objects having ephemerides provided by the SPK
system and objects having constant position or constant velocity
are
SPKCPO {SPK, Constant position observer}
SPKCPT {SPK, Constant position target}
SPKCVO {SPK, Constant velocity observer}
SPKCVT {SPK, Constant velocity target}
Examples
The numerical results shown for this example may differ across
platforms. The results depend on the SPICE kernels used as
input, the compiler and supporting libraries, and the machine
specific arithmetic implementation.
1) Demonstrate use of this routine; in particular demonstrate
applications of the output frame evaluation locus.
The following program is not necessarily realistic: for
brevity, it combines several unrelated computations.
Task Description
================
Find the state of a given surface point on earth, corrected
for light time and stellar aberration, relative to the Mars
Global Surveyor spacecraft, expressed in the earth fixed
reference frame ITRF93. The selected point is the position
of the DSN station DSS-14.
Contrast the states computed by setting the output frame
evaluation locus to 'TARGET' and to 'CENTER'. Show that the
latter choice produces results very close to those that
can be obtained using SPKEZR.
Also compute the state of a selected Mars surface point as
seen from MGS. The point we'll use is the narrow angle MOC
boresight surface intercept corresponding to the chosen
observation time. Express the state in a spacecraft-centered
reference frame. Use the output frame evaluation locus
'OBSERVER' for this computation.
The observation epoch is 2003 OCT 13 06:00:00 UTC.
Kernels
=======
Use the meta-kernel shown below to load the required SPICE
kernels.
KPL/MK
File name: spkcpt_ex1.tm
This is the meta-kernel file for the header code example for
the subroutine SPKCPT. The kernel files referenced by this
meta-kernel can be found on the NAIF website.
In order for an application to use this meta-kernel, the
kernels referenced here must be present in the user's
current working directory.
The names and contents of the kernels referenced
by this meta-kernel are as follows:
File name Contents
--------- --------
de421.bsp Planetary ephemeris
pck00010.tpc Planet orientation and
radii
naif0010.tls Leapseconds
earth_720101_070426.bpc Earth historical
binary PCK
earthstns_itrf93_050714.bsp DSN station SPK
mgs_moc_v20.ti MGS MOC instrument
parameters
mgs_sclkscet_00061.tsc MGS SCLK coefficients
mgs_sc_ext12.bc MGS s/c bus attitude
mgs_ext12_ipng_mgs95j.bsp MGS ephemeris
\begindata
KERNELS_TO_LOAD = ( 'de421.bsp',
'pck00010.tpc',
'naif0010.tls',
'earth_720101_070426.bpc',
'earthstns_itrf93_050714.bsp',
'mgs_moc_v20.ti',
'mgs_sclkscet_00061.tsc',
'mgs_sc_ext12.bc',
'mgs_ext12_ipng_mgs95j.bsp' )
\begintext
End of meta-kernel.
Example code begins here.
C
C Program: SPKCPT_EX1
C
C This program demonstrates the use of SPKCPT.
C Computations are performed using all three possible
C values of the output frame evaluation locus REFLOC:
C
C 'TARGET'
C 'OBSERVER'
C 'CENTER'
C
C Several unrelated computations are performed in
C this program. In particular, computations
C involving a surface point on Mars are included
C simply to demonstrate use of the 'OBSERVER'
C option.
C
PROGRAM SPKCPT_EX1
IMPLICIT NONE
C
C SPICELIB functions
C
DOUBLE PRECISION VDIST
DOUBLE PRECISION VNORM
C
C Local parameters
C
CHARACTER*(*) CAMERA
PARAMETER ( CAMERA = 'MGS_MOC_NA' )
CHARACTER*(*) FMT0
PARAMETER ( FMT0 = '(A,3F20.8)' )
CHARACTER*(*) FMT1
PARAMETER ( FMT1 = '(1X,A, F20.8)' )
CHARACTER*(*) META
PARAMETER ( META = 'spkcpt_ex1.tm' )
CHARACTER*(*) TIMFMT
PARAMETER ( TIMFMT =
. 'YYYY MON DD HR:MN:SC.###### UTC' )
INTEGER BDNMLN
PARAMETER ( BDNMLN = 36 )
INTEGER CORLEN
PARAMETER ( CORLEN = 10 )
INTEGER LOCLEN
PARAMETER ( LOCLEN = 25 )
INTEGER FRNMLN
PARAMETER ( FRNMLN = 32 )
INTEGER MAXBND
PARAMETER ( MAXBND = 10 )
INTEGER SHPLEN
PARAMETER ( SHPLEN = 80 )
INTEGER TIMLEN
PARAMETER ( TIMLEN = 40 )
C
C Local variables
C
CHARACTER*(CORLEN) ABCORR
CHARACTER*(FRNMLN) CAMREF
CHARACTER*(TIMLEN) EMITIM
CHARACTER*(LOCLEN) REFLOC
CHARACTER*(BDNMLN) OBSRVR
CHARACTER*(TIMLEN) OBSTIM
CHARACTER*(FRNMLN) OUTREF
CHARACTER*(SHPLEN) SHAPE
CHARACTER*(BDNMLN) TARGET
CHARACTER*(BDNMLN) TRGCTR
CHARACTER*(FRNMLN) TRGREF
DOUBLE PRECISION BOUNDS ( 3, MAXBND )
DOUBLE PRECISION BSIGHT ( 3 )
DOUBLE PRECISION ET
DOUBLE PRECISION LT0
DOUBLE PRECISION LT1
DOUBLE PRECISION LT2
DOUBLE PRECISION LT3
DOUBLE PRECISION SPOINT ( 3 )
DOUBLE PRECISION SRFVEC ( 3 )
DOUBLE PRECISION STATE0 ( 6 )
DOUBLE PRECISION STATE1 ( 6 )
DOUBLE PRECISION STATE2 ( 6 )
DOUBLE PRECISION STATE3 ( 6 )
DOUBLE PRECISION TRGEPC
DOUBLE PRECISION TRGPOS ( 3 )
INTEGER CAMID
INTEGER I
INTEGER N
LOGICAL FOUND
C
C Load SPICE kernels.
C
CALL FURNSH ( META )
C
C Convert the observation time to seconds past J2000 TDB.
C
OBSTIM = '2003 OCT 13 06:00:00.000000 UTC'
CALL STR2ET ( OBSTIM, ET )
C
C Set the observer, target center, target frame, and
C target state relative to its center.
C
OBSRVR = 'MGS'
TRGCTR = 'EARTH'
TRGREF = 'ITRF93'
C
C Set the position of DSS-14 relative to the earth's
C center at the J2000 epoch, expressed in the
C ITRF93 reference frame. Values come from the
C earth station SPK specified in the meta-kernel.
C
C The actual station velocity is non-zero due
C to tectonic plate motion; we ignore the motion
C in this example. See the routine SPKCVT for an
C example in which the plate motion is accounted for.
C
TRGPOS(1) = -2353.6213656676991D0
TRGPOS(2) = -4641.3414911499403D0
TRGPOS(3) = 3677.0523293197439D0
C
C Find the apparent state of the station relative
C to the spacecraft in the ITRF93 reference frame.
C Evaluate the earth's orientation, that is the
C orientation of the ITRF93 frame relative to the
C J2000 frame, at the epoch obtained by correcting
C the observation time for one-way light time. This
C correction is obtained by setting REFLOC to 'TARGET'.
C
OUTREF = 'ITRF93'
ABCORR = 'CN+S'
REFLOC = 'TARGET'
C
C Compute the observer-target state.
C
CALL SPKCPT ( TRGPOS, TRGCTR, TRGREF,
. ET, OUTREF, REFLOC, ABCORR,
. OBSRVR, STATE0, LT0 )
C
C Display the computed state and light time.
C
CALL TIMOUT ( ET-LT0, TIMFMT, EMITIM )
WRITE (*,*) ' '
WRITE (*,*) 'Frame evaluation locus: ', REFLOC
WRITE (*,*) ' '
WRITE (*,*) 'Observer: ', OBSRVR
WRITE (*,*) 'Observation time: ', OBSTIM
WRITE (*,*) 'Target center: ', TRGCTR
WRITE (*,*) 'Target frame: ', TRGREF
WRITE (*,*) 'Emission time: ', EMITIM
WRITE (*,*) 'Output reference frame: ', OUTREF
WRITE (*,*) 'Aberration correction: ', ABCORR
WRITE (*,*) ' '
WRITE (*,*) 'Observer-target position (km): '
WRITE (*,FMT0) ' ', ( STATE0(I), I = 1, 3 )
WRITE (*,*) 'Observer-target velocity (km/s): '
WRITE (*,FMT0) ' ', ( STATE0(I), I = 4, 6 )
WRITE (*,FMT1) 'Light time (s): ', LT0
WRITE (*,*) ' '
C
C Repeat the computation, this time evaluating the
C earth's orientation at the epoch obtained by
C subtracting from the observation time the one way
C light time from the earth's center.
C
C This is equivalent to looking up the observer-target
C state using SPKEZR.
C
REFLOC = 'CENTER'
CALL SPKCPT ( TRGPOS, TRGCTR, TRGREF,
. ET, OUTREF, REFLOC, ABCORR,
. OBSRVR, STATE1, LT1 )
C
C Display the computed state and light time.
C
CALL TIMOUT ( ET-LT1, TIMFMT, EMITIM )
WRITE (*,*) ' '
WRITE (*,*) 'Frame evaluation locus: ', REFLOC
WRITE (*,*) ' '
WRITE (*,*) 'Observer: ', OBSRVR
WRITE (*,*) 'Observation time: ', OBSTIM
WRITE (*,*) 'Target center: ', TRGCTR
WRITE (*,*) 'Target frame: ', TRGREF
WRITE (*,*) 'Emission time: ', EMITIM
WRITE (*,*) 'Output reference frame: ', OUTREF
WRITE (*,*) 'Aberration correction: ', ABCORR
WRITE (*,*) ' '
WRITE (*,*) 'Observer-target position (km): '
WRITE (*,FMT0) ' ', ( STATE1(I), I = 1, 3 )
WRITE (*,*) 'Observer-target velocity (km/s): '
WRITE (*,FMT0) ' ', ( STATE1(I), I = 4, 6 )
WRITE (*,FMT1) 'Light time (s): ', LT1
WRITE (*,*) ' '
WRITE (*,FMT1) 'Distance between above positions '
.// '(km): ', VDIST( STATE0, STATE1 )
WRITE (*,FMT1) 'Velocity difference magnitude '
.// ' (km/s): ',
. VDIST( STATE0(4), STATE1(4) )
C
C Check: compare the state computed directly above
C to one produced by SPKEZR.
C
TARGET = 'DSS-14'
CALL SPKEZR ( TARGET, ET, OUTREF, ABCORR,
. OBSRVR, STATE2, LT2 )
WRITE (*,*) ' '
WRITE (*,*) ' '
WRITE (*,*) 'State computed using SPKEZR: '
WRITE (*,*) ' '
WRITE (*,*) 'Observer: ', OBSRVR
WRITE (*,*) 'Observation time: ', OBSTIM
WRITE (*,*) 'Target: ', TARGET
WRITE (*,*) 'Output reference frame: ', OUTREF
WRITE (*,*) 'Aberration correction: ', ABCORR
WRITE (*,*) ' '
WRITE (*,*) 'Observer-target position (km): '
WRITE (*,FMT0) ' ', ( STATE2(I), I = 1, 3 )
WRITE (*,*) 'Observer-target velocity (km/s): '
WRITE (*,FMT0) ' ', ( STATE2(I), I = 4, 6 )
WRITE (*,FMT1) 'Light time (s): ', LT2
WRITE (*,*) ' '
WRITE (*,FMT1) 'Distance between last two '
.// 'positions (km): ',
. VDIST ( STATE1, STATE2 )
WRITE (*,FMT1) 'Velocity difference magnitude '
.// ' (km/s): ',
. VDIST( STATE1(4), STATE2(4) )
C
C Finally, compute an observer-target state in
C a frame centered at the observer.
C The reference frame will be that of the
C MGS MOC NA camera.
C
C In this case we'll use as the target the surface
C intercept on Mars of the camera boresight. This
C allows us to easily verify the correctness of
C the results returned by SPKCPT.
C
C Get camera frame and FOV parameters. We'll need
C the camera ID code first.
C
CALL BODN2C ( CAMERA, CAMID, FOUND )
IF ( .NOT. FOUND ) THEN
WRITE (*,*) 'Camera name could not be mapped '
. // 'to an ID code.'
STOP
END IF
C
C GETFOV will return the name of the camera-fixed frame
C in the string CAMREF, the camera boresight vector in
C the array BSIGHT, and the FOV corner vectors in the
C array BOUNDS. All we're going to use are the camera
C frame name and camera boresight.
C
CALL GETFOV ( CAMID, MAXBND, SHAPE, CAMREF,
. BSIGHT, N, BOUNDS )
C
C Find the camera boresight surface intercept.
C
TRGCTR = 'MARS'
TRGREF = 'IAU_MARS'
CALL SINCPT ( 'ELLIPSOID', TRGCTR, ET, TRGREF,
. ABCORR, OBSRVR, CAMREF, BSIGHT,
. SPOINT, TRGEPC, SRFVEC, FOUND )
OUTREF = CAMREF
REFLOC = 'OBSERVER'
CALL SPKCPT ( SPOINT, TRGCTR, TRGREF,
. ET, OUTREF, REFLOC, ABCORR,
. OBSRVR, STATE3, LT3 )
C
C Convert the emission time and the target state
C evaluation epoch to strings for output.
C
CALL TIMOUT ( ET - LT3, TIMFMT, EMITIM )
WRITE (*,*) ' '
WRITE (*,*) ' '
WRITE (*,*) 'Frame evaluation locus: ', REFLOC
WRITE (*,*) ' '
WRITE (*,*) 'Observer: ', OBSRVR
WRITE (*,*) 'Observation time: ', OBSTIM
WRITE (*,*) 'Target center: ', TRGCTR
WRITE (*,*) 'Target frame: ', TRGREF
WRITE (*,*) 'Emission time: ', EMITIM
WRITE (*,*) 'Output reference frame: ', OUTREF
WRITE (*,*) 'Aberration correction: ', ABCORR
WRITE (*,*) ' '
WRITE (*,*) 'Observer-target position (km): '
WRITE (*,FMT0) ' ', ( STATE3(I), I = 1, 3 )
WRITE (*,*) 'Observer-target velocity (km/s): '
WRITE (*,FMT0) ' ', ( STATE3(I), I = 4, 6 )
WRITE (*,FMT1) 'Light time (s): ', LT3
WRITE (*,FMT1) 'Target range from SINCPT (km): '
.// ' ', VNORM( SRFVEC )
WRITE (*,*) ' '
END
When this program was executed on a Mac/Intel/gfortran/64-bit
platform, the output was:
Frame evaluation locus: TARGET
Observer: MGS
Observation time: 2003 OCT 13 06:00:00.000000 UTC
Target center: EARTH
Target frame: ITRF93
Emission time: 2003 OCT 13 05:55:44.232914 UTC
Output reference frame: ITRF93
Aberration correction: CN+S
Observer-target position (km):
52746468.84243592 52367725.79653772 18836142.68957234
Observer-target velocity (km/s):
3823.39593314 -3840.60002121 2.21337692
Light time (s): 255.76708533
Frame evaluation locus: CENTER
Observer: MGS
Observation time: 2003 OCT 13 06:00:00.000000 UTC
Target center: EARTH
Target frame: ITRF93
Emission time: 2003 OCT 13 05:55:44.232914 UTC
Output reference frame: ITRF93
Aberration correction: CN+S
Observer-target position (km):
52746419.34648802 52367775.65036674 18836142.68969753
Observer-target velocity (km/s):
3823.40103499 -3840.59789000 2.21337692
Light time (s): 255.76708533
Distance between above positions (km): 70.25135676
Velocity difference magnitude (km/s): 0.00552910
State computed using SPKEZR:
Observer: MGS
Observation time: 2003 OCT 13 06:00:00.000000 UTC
Target: DSS-14
Output reference frame: ITRF93
Aberration correction: CN+S
Observer-target position (km):
52746419.34641990 52367775.65039122 18836142.68968301
Observer-target velocity (km/s):
3823.40103499 -3840.59789000 2.21337692
Light time (s): 255.76708533
Distance between last two positions (km): 0.00007383
Velocity difference magnitude (km/s): 0.00000000
Frame evaluation locus: OBSERVER
Observer: MGS
Observation time: 2003 OCT 13 06:00:00.000000 UTC
Target center: MARS
Target frame: IAU_MARS
Emission time: 2003 OCT 13 05:59:59.998702 UTC
Output reference frame: MGS_MOC_NA
Aberration correction: CN+S
Observer-target position (km):
0.00000001 -0.00000001 388.97573572
Observer-target velocity (km/s):
2.91968665 0.15140014 0.92363513
Light time (s): 0.00129748
Target range from SINCPT (km): 388.97573572
Restrictions
1) This routine may not be suitable for work with stars or other
objects having large distances from the observer, due to loss
of precision in position vectors.
Literature_References
None.
Author_and_Institution
N.J. Bachman (JPL)
J. Diaz del Rio (ODC Space)
S.C. Krening (JPL)
B.V. Semenov (JPL)
Version
SPICELIB Version 1.0.1, 25-MAY-2021 (JDR)
Edited the header to comply with NAIF standard.
Modified code example output format for the solution to fit
within the $Examples section without modifications.
SPICELIB Version 1.0.0, 27-MAR-2012 (NJB) (SCK) (BVS)
|
Fri Dec 31 18:36:51 2021