Index of Functions: A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X 
Index Page
cylsph_c

Table of contents
Procedure
Abstract
Required_Reading
Keywords
Brief_I/O
Detailed_Input
Detailed_Output
Parameters
Exceptions
Files
Particulars
Examples
Restrictions
Literature_References
Author_and_Institution
Version
Index_Entries

Procedure

   cylsph_c ( Cylindrical to spherical ) 

   void cylsph_c ( SpiceDouble    r,
                   SpiceDouble    clon,
                   SpiceDouble    z,
                   SpiceDouble *  radius,
                   SpiceDouble *  colat,
                   SpiceDouble *  slon )

Abstract

   Convert from cylindrical to spherical coordinates.

Required_Reading

   None.

Keywords

   CONVERSION
   COORDINATES


Brief_I/O

   VARIABLE  I/O  DESCRIPTION
   --------  ---  -------------------------------------------------
   r          I   Distance of point from z axis.
   clon       I   Angle (radians) of point from XZ plane.
   z          I   Height of point above XY plane.
   radius     O   Distance of point from origin.
   colat      O   Polar angle (co-latitude in radians) of point.
   slon       O   Azimuthal angle (longitude) of point (radians).

Detailed_Input

   r           is the distance of the point of interest from z axis.

   clon        is the cylindrical angle (radians) of the point from the
               XZ plane.

   z           is the height of the point above XY plane.

Detailed_Output

   radius      is the distance of the point from origin.

   colat       is the polar angle (co-latitude in radians) of the point.
               The range of `colat' is [-pi, pi].

   slon        is the azimuthal angle (longitude) of the point
               (radians). `slon' is set equal to `clon'.

Parameters

   None.

Exceptions

   Error free.

Files

   None.

Particulars

   This returns the spherical coordinates of a point whose position
   is input through cylindrical coordinates.

Examples

   The numerical results shown for these examples may differ across
   platforms. The results depend on the SPICE kernels used as
   input, the compiler and supporting libraries, and the machine
   specific arithmetic implementation.

   1) Compute the cylindrical coordinates of the position of the
      Moon as seen from the Earth, and convert them to spherical
      and rectangular coordinates.

      Use the meta-kernel shown below to load the required SPICE
      kernels.


         KPL/MK

         File name: cylsph_ex1.tm

         This meta-kernel is intended to support operation of SPICE
         example programs. The kernels shown here should not be
         assumed to contain adequate or correct versions of data
         required by SPICE-based user applications.

         In order for an application to use this meta-kernel, the
         kernels referenced here must be present in the user's
         current working directory.

         The names and contents of the kernels referenced
         by this meta-kernel are as follows:

            File name                     Contents
            ---------                     --------
            de421.bsp                     Planetary ephemeris
            naif0012.tls                  Leapseconds


         \begindata

            KERNELS_TO_LOAD = ( 'de421.bsp',
                                'naif0012.tls'  )

         \begintext

         End of meta-kernel


      Example code begins here.


      /.
         Program cylsph_ex1
      ./
      #include <stdio.h>
      #include "SpiceUsr.h"

      int main( )
      {

         /.
         Local variables
         ./
         SpiceDouble          clon;
         SpiceDouble          colat;
         SpiceDouble          et;
         SpiceDouble          lt;
         SpiceDouble          pos    [3];
         SpiceDouble          r;
         SpiceDouble          radius;
         SpiceDouble          rectan [3];
         SpiceDouble          slon;
         SpiceDouble          z;

         /.
         Load SPK and LSK kernels, use a meta kernel for
         convenience.
         ./
         furnsh_c ( "cylsph_ex1.tm" );

         /.
         Look up the geometric state of the Moon as seen from
         the Earth at 2017 Mar 20, relative to the J2000
         reference frame.
         ./
         str2et_c ( "2017 Mar 20", &et );

         spkpos_c ( "Moon", et, "J2000", "NONE", "Earth", pos, &lt );

         /.
         Convert the position vector `pos' to cylindrical
         coordinates.
         ./
         reccyl_c ( pos, &r, &clon, &z );

         /.
         Convert the cylindrical coordinates to spherical.
         ./
         cylsph_c ( r, clon, z, &radius, &colat, &slon );

         /.
         Convert the spherical coordinates to rectangular.
         ./
         sphrec_c ( radius, colat, slon, rectan );

         printf( " \n" );
         printf( "Original rectangular coordinates:\n" );
         printf( " \n" );
         printf( " X           (km):  %19.8f\n", pos[0] );
         printf( " Y           (km):  %19.8f\n", pos[1] );
         printf( " Z           (km):  %19.8f\n", pos[2] );
         printf( " \n" );
         printf( "Cylindrical coordinates:\n" );
         printf( " \n" );
         printf( " Radius      (km):  %19.8f\n", r );
         printf( " Longitude  (deg):  %19.8f\n", clon*dpr_c ( ) );
         printf( " Z           (km):  %19.8f\n", z );
         printf( " \n" );
         printf( "Spherical coordinates:\n" );
         printf( " \n" );
         printf( " Radius      (km):  %19.8f\n", radius );
         printf( " Colatitude (deg):  %19.8f\n", colat*dpr_c ( ) );
         printf( " Longitude  (deg):  %19.8f\n", slon*dpr_c ( ) );
         printf( " \n" );
         printf( "Rectangular coordinates from sphrec_c:\n" );
         printf( " \n" );
         printf( " X           (km):  %19.8f\n", rectan[0] );
         printf( " Y           (km):  %19.8f\n", rectan[1] );
         printf( " Z           (km):  %19.8f\n", rectan[2] );
         printf( " \n" );

         return ( 0 );
      }


      When this program was executed on a Mac/Intel/cc/64-bit
      platform, the output was:


      Original rectangular coordinates:

       X           (km):      -55658.44323296
       Y           (km):     -379226.32931475
       Z           (km):     -126505.93063865

      Cylindrical coordinates:

       Radius      (km):      383289.01777726
       Longitude  (deg):         261.65040211
       Z           (km):     -126505.93063865

      Spherical coordinates:

       Radius      (km):      403626.33912495
       Colatitude (deg):         108.26566077
       Longitude  (deg):         261.65040211

      Rectangular coordinates from sphrec_c:

       X           (km):      -55658.44323296
       Y           (km):     -379226.32931475
       Z           (km):     -126505.93063865


   2) Create a table showing a variety of cylindrical coordinates
      and the corresponding spherical coordinates.

      Corresponding spherical and cylindrical coordinates are
      listed to three decimal places. All input and output angles
      are in degrees.


      Example code begins here.


      /.
         Program cylsph_ex2
      ./
      #include <stdio.h>
      #include "SpiceUsr.h"

      int main( )
      {

         /.
         Local parameters.
         ./
         #define NREC         11

         /.
         Local variables.
         ./
         SpiceDouble          colat;
         SpiceDouble          radius;
         SpiceDouble          rclon;
         SpiceDouble          slon;

         SpiceInt             i;

         /.
         Define the input cylindrical coordinates. Angles
         in degrees.
         ./

         SpiceDouble          r      [NREC] = { 0.0, 1.0, 1.0,
                                                0.0, 1.0, 1.0,
                                                0.0, 1.0, 1.0,
                                                0.0, 0.0      };

         SpiceDouble          clon   [NREC] = {   0.0,   0.0,  90.0,
                                                  0.0, 180.0, -90.0,
                                                  0.0,  45.0, 180.0,
                                                180.0,  33.0        };

         SpiceDouble          z      [NREC] = {  0.0,  0.0,  0.0,
                                                 1.0,  1.0,  0.0,
                                                -1.0,  0.0, -1.0,
                                                 1.0,  0.0       };

         /.
         Print the banner.
         ./
         printf( "    r       clon      z      radius   colat     slon \n" );
         printf( " -------  -------  -------  -------  -------  -------\n" );

         /.
         Do the conversion. Output angles in degrees.
         ./
         for ( i = 0; i < NREC; i++ )
         {

            rclon = clon[i] * rpd_c ( );

            cylsph_c ( r[i], rclon, z[i], &radius, &colat, &slon );

            printf( "%8.3f %8.3f %8.3f ", r[i], clon[i], z[i] );
            printf( "%8.3f %8.3f %8.3f\n",
                    radius, colat * dpr_c ( ), slon  * dpr_c ( ) );

         }

         return ( 0 );
      }


      When this program was executed on a Mac/Intel/cc/64-bit
      platform, the output was:


          r       clon      z      radius   colat     slon
       -------  -------  -------  -------  -------  -------
         0.000    0.000    0.000    0.000    0.000    0.000
         1.000    0.000    0.000    1.000   90.000    0.000
         1.000   90.000    0.000    1.000   90.000   90.000
         0.000    0.000    1.000    1.000    0.000    0.000
         1.000  180.000    1.000    1.414   45.000  180.000
         1.000  -90.000    0.000    1.000   90.000  -90.000
         0.000    0.000   -1.000    1.000  180.000    0.000
         1.000   45.000    0.000    1.000   90.000   45.000
         1.000  180.000   -1.000    1.414  135.000  180.000
         0.000  180.000    1.000    1.000    0.000  180.000
         0.000   33.000    0.000    0.000    0.000   33.000

Restrictions

   None.

Literature_References

   None.

Author_and_Institution

   J. Diaz del Rio     (ODC Space)
   B.V. Semenov        (JPL)
   W.L. Taber          (JPL)
   E.D. Wright         (JPL)

Version

   -CSPICE Version 1.1.0, 02-JUL-2021 (JDR)

       Changed the argument names "lonc" and "lon" to "clon" and
       "slon" for consistency with other routines.

       Edited the header to comply with NAIF standard.
       Added complete code examples.

   -CSPICE Version 1.0.2, 26-JUL-2016 (BVS)

       Minor headers edits.

   -CSPICE Version 1.0.1, 08-FEB-1998 (EDW)

       Corrected and clarified header entries.

   -CSPICE Version 1.0.0, 25-OCT-1997 (EDW) (WLT)

Index_Entries

   cylindrical to spherical
Fri Dec 31 18:41:03 2021