KPL/FK SPICE Lunar Reference Frame Specification Kernel ===================================================================== Original file name: moon_060721.tf Creation date: 2006 July 21 16:52 Revision date: 2007 February 12 03:14 Created by: Nat Bachman (NAIF/JPL) Revision description: The comments in this kernel have been updated to refer to the current lunar binary PCK. Also, this kernel now refers to the lunar frame association kernels which direct the SPICE system to associate with the Moon either the MOON_ME or MOON_PA reference frames. The data (that is, the "keyword = value" assignments) in this kernel are unchanged. This file was modified on 26-FEB-2009 by Nat Bachman. The initial blank line was removed and this change description was added. Nothing else has been changed. Frames Defined by this Kernel ===================================================================== Frame Name Relative to Type Frame ID -------------- ----------------- ----- -------- MOON_PA MOON_PA_DE403 FIXED 31000 MOON_ME MOON_ME_DE403 FIXED 31001 MOON_PA_DE403 ICRF/J2000 PCK 31002 MOON_ME_DE403 MOON_PA_DE403 FIXED 31003 Introduction ===================================================================== This kernel specifies lunar body-fixed reference frames for use by SPICE-based application software. These reference frames are associated with high-accuracy lunar orientation data provided by the JPL Solar System Dynamics Group's planetary ephemerides (both trajectory and lunar orientation data are stored in these ephemeris files). These ephemerides have names of the form DE-nnn (DE stands for "developmental ephemeris"). The frames specified by this kernel are realizations of two different lunar reference systems: Principal axes (PA) system -------------------------- The axes of this system are defined by the principal axes of the Moon. Due to the nature of the Moon's orbit and rotation, the Z axis of this system does not coincide with the Moon's mean spin axis, nor does the X axis coincide with the mean direction to the center of the Earth (in contrast with the ME system defined below). Lunar principal axes frames realizing the lunar PA system and specified by this kernel are associated with JPL planetary ephemerides. Each new JPL planetary ephemeris can (but does not necessarily) define a new realization of the lunar principal axes system. Coordinates of lunar surface features expressed in lunar PA frames can change slightly from one lunar ephemeris version to the next. Mean Earth/polar axis (ME) system --------------------------------- The Lunar mean Earth/axis system is a lunar body-fixed reference system used in the IAU/IAG Working Group Report [2] to describe the orientation of the Moon relative to the ICRF frame. The +Z axis of this system is aligned with the mean lunar north pole, while the prime meridian contains the the mean Earth direction. The mean directions used to define the axes of a mean Earth/polar axis reference frame realizing the lunar ME system and specified by this kernel are associated with a given JPL planetary ephemeris version. The rotation between the mean Earth frame for a given ephemeris version and the associated principal axes frame is given by a constant matrix (see [1]). For each JPL planetary ephemeris (DE), this kernel includes specifications of the corresponding principal axes and mean Earth/ polar axis frames. The names of these frames have the form MOON_PA_DEnnn and MOON_ME_DEnnn respectively, where nnn is the version number of the DE. This set of DE-dependent frame specifications will grow over time; frame specifications pertaining to older DEs will be retained in later versions of this frame kernel. For each of the two reference systems, there is a corresponding "generic" frame specification: these generic frames are simply aliases for the PA and ME frames associated with the latest DE. The generic frame names are MOON_PA MOON_ME These generic frame names are provided to enable SPICE-based applications to refer to the latest DE-based (or other) lunar rotation data without requiring code modifications as new data become available. SPICE users may, if they wish, modify this kernel to assign these frame aliases to other frames than those selected here, for example, older DE-based frames. NAIF recommends that, if this frame kernel is modified, the name of this file also be changed to avoid confusion. Comparison of PA and ME frames ------------------------------ The rotation between the mean Earth frame for a given DE and the associated principal axes frame for the same DE is given by a constant matrix (see [1]). For DE-403, the rotation angle of this matrix is approximately 0.028241 degrees; this is equivalent to approximately 860 m when expressed as a displacement along a great circle on the Moon's surface. Comparison of DE-based and IAU/IAG report rotation data ------------------------------------------------------- Within the SPICE system, the lunar ME frame specified by the rotational elements from the IAU/IAG Working Group report [2] is given the name IAU_MOON; the data defining this frame are provided in a generic text PCK. The orientation of the lunar ME frame obtained by applying the DE-based PA-to-ME rotation described above to the DE-based lunar libration data does not agree closely with the lunar ME frame orientation given by the rotational elements from the IAU/IAG Working Group report (that is, the IAU_MOON frame). The difference is due to truncation of the libration series used in the report's formula for lunar orientation (see [1]). In the case of DE-403, for the time period ~2000-2020, this time-dependent difference has an amplitude of approximately 0.005 degrees, which is equivalent to approximately 150 m, measured along a great circle on the Moon's surface, while the average value is approximately 0.0025 degrees, or 75 m. Regarding Use of the ICRF in SPICE ================================== The IERS Celestial Reference Frame (ICRF) is offset from the J2000 reference frame (equivalent to EME 2000) by a small rotation: the J2000 pole offset magnitude is about 18 milliarcseconds (mas) and the equinox offset magnitude is approximately 78 milliarcseconds (see [3]). Certain SPICE data products *use the frame label "J2000" for data that actually are referenced to the ICRF.* This is the case for SPK files containing JPL version DE-4nn planetary ephemerides, for orientation data from generic text PCKs, and for binary PCKs, including binary lunar PCKs used in conjunction with this lunar frame kernel. Consequently, when SPICE computes the rotation between the "J2000" frame and the either of the lunar PA or ME frames, what's computed is actually the rotation between the ICRF and the respective lunar frame. Similarly, when a SPICE is used to compute the state given by a JPL DE planetary ephemeris SPK file of one ephemeris object relative to another (for example, the state of the Moon with respect to the Earth), expressed relative to the frame "J2000," the state is actually expressed relative to the ICRF. Because SPICE is already using the ICRF, users normally need not use the J2000-to-ICRF transformation to adjust results computed with SPICE. Lunar body-fixed frame associations ===================================================================== By default, the SPICE system considers the body-fixed reference frame associated with the Moon to be the one named IAU_MOON. This body-frame association affects the outputs of the SPICE frame system routines CIDFRM CNMFRM and of the SPICE time conversion and geometry routines ET2LST ILLUM SRFXPT SUBPT SUBSOL Finally, any code that calls these routines to obtain results involving lunar body-fixed frames are affected. Within SPICE, the only higher-level system that is affected is the dynamic frame system. NAIF provides "frame association" kernels that simplify changing the body-fixed frame associated with the Moon. Using FURNSH to load either of the kernels named below sets the Moon's body-fixed frame to that shown in the right-hand column: Kernel name Lunar body-fixed frame ----------- ---------------------- moon_assoc_me.tf MOON_ME moon_assoc_pa.tf MOON_PA For further information see the in-line comments in the association kernels themselves. Also see the Frames Required Reading section titled "Connecting an Object to its Body-fixed Frame." Using this Kernel ===================================================================== In order for a SPICE-based application to use reference frames specified by this kernel, the application must load both this kernel and a binary lunar PCK containing lunar orientation data for the time of interest. Normally the kernels need be loaded only once during program initialization. SPICE users may find it convenient to use a meta-kernel (also called a "FURNSH kernel") to name the kernels to be loaded. Below, we show an example of such a meta-kernel, as well as the source code of a small Fortran program that uses lunar body fixed frames. The program's output is included as well. The kernel names shown here are simply used as examples; users must select the kernels appropriate for their applications. Numeric results shown below may differ very slightly from those obtained on users' computer systems. Meta-kernel ----------- Example meta-kernel showing use of - binary lunar PCK - generic lunar frame kernel (FK) - leapseconds kernel (LSK) - planetary SPK 21-JUL-2006 (NJB) Note: to actually use this kernel, replace the @ characters below with backslashes (\). The backslash character cannot be used here because these comments would be interpreted as actual load commands. This meta-kernel assumes that the referenced kernels exist in the user's current working directory. @begindata KERNELS_TO_LOAD = ( 'moon_pa_de403_1950-2198.bpc' 'moon_060721.tf' 'leapseconds.ker' 'de405.bsp' ) @begintext Example program --------------- PROGRAM EX1 IMPLICIT NONE INTEGER FILSIZ PARAMETER ( FILSIZ = 255 ) CHARACTER*(FILSIZ) META DOUBLE PRECISION ET DOUBLE PRECISION LT DOUBLE PRECISION STME ( 6 ) DOUBLE PRECISION STPA ( 6 ) C C Prompt user for meta-kernel name. C CALL PROMPT ( 'Enter name of meta-kernel > ', META ) C C Load lunar PCK, generic lunar frame kernel, C leapseconds kernel, and planetary ephemeris C via metakernel. C CALL FURNSH ( META ) C C Convert a time of interest from UTC to ET. C CALL STR2ET ( '2006 jun 8 06:50:00', ET ) WRITE (*,*) 'ET (sec past J2000 TDB): ', ET WRITE (*,*) ' State of Earth relative to Moon' C C Find the geometric state of the Earth relative to the C Moon at ET, expressed relative to the ME frame. C CALL SPKEZR ( 'Earth', ET, 'MOON_ME', . 'NONE', 'Moon', STME, LT ) WRITE (*,*) ' In MOON_ME frame:' WRITE (*,*) STME C C Find the geometric state of the Earth relative to the C Moon at ET, expressed relative to the PA frame. C CALL SPKEZR ( 'Earth', ET, 'MOON_PA', . 'NONE', 'Moon', STPA, LT ) WRITE (*,*) ' In MOON_PA frame:' WRITE (*,*) STPA END Program output -------------- Enter name of meta-kernel > meta ET (sec past J2000 TDB): 203021465. State of Earth relative to Moon In MOON_ME frame: 391739.183 -33210.254 25299.0887 -0.0592286405 -0.048721834 0.0917188552 In MOON_PA frame: 391719.148 -33331.588 25449.2934 -0.0592788895 -0.0487034073 0.0916961762 References ===================================================================== [1] A.S. Konopliv, S.W. Asmar, E. Carranza, W.L. Sjogren, and D.N. Yuan (2001). "Recent Gravity Models as a Result of the Lunar Prospector Mission," Icarus 150, pp. 1-18. [2] Seidelmann, P.K., Abalakin, V.K., Bursa, M., Davies, M.E., Bergh, C. de, Lieske, J.H., Oberst, J., Simon, J.L., Standish, E.M., Stooke, P., and Thomas, P.C. (2002). "Report of the IAU/IAG Working Group on Cartographic Coordinates and Rotational Elements of the Planets and Satellites: 2000," Celestial Mechanics and Dynamical Astronomy, v.82, Issue 1, pp. 83-111. [3] Roncoli, R. (2005). "Lunar Constants and Models Document," JPL D-32296. Frame Specifications ===================================================================== MOON_PA is the name of the generic lunar principal axes (PA) reference frame. This frame is an alias for the principal axes frame defined by the latest version of the JPL Solar System Dynamics Group's planetary ephemeris. In this instance of the lunar reference frames kernel, MOON_PA is an alias for the lunar principal axes frame associated with the planetary ephemeris DE-403. \begindata FRAME_MOON_PA = 31000 FRAME_31000_NAME = 'MOON_PA' FRAME_31000_CLASS = 4 FRAME_31000_CLASS_ID = 31000 FRAME_31000_CENTER = 301 TKFRAME_31000_SPEC = 'MATRIX' TKFRAME_31000_RELATIVE = 'MOON_PA_DE403' TKFRAME_31000_MATRIX = ( 1 0 0 0 1 0 0 0 1 ) \begintext MOON_ME is the name of the generic lunar mean Earth/ polar axis (ME) reference frame. This frame is an alias for the mean Earth/polar axis frame defined by the latest version of the JPL Solar System Dynamics Group's planetary ephemeris. In this instance of the lunar reference frames kernel, MOON_ME is an alias for the lunar mean Earth/ polar axis frame associated with the planetary ephemeris DE-403. \begindata FRAME_MOON_ME = 31001 FRAME_31001_NAME = 'MOON_ME' FRAME_31001_CLASS = 4 FRAME_31001_CLASS_ID = 31001 FRAME_31001_CENTER = 301 TKFRAME_31001_SPEC = 'MATRIX' TKFRAME_31001_RELATIVE = 'MOON_ME_DE403' TKFRAME_31001_MATRIX = ( 1 0 0 0 1 0 0 0 1 ) \begintext MOON_PA_DE403 is the name of the lunar principal axes reference frame defined by JPL's DE-403 planetary ephemeris. \begindata FRAME_MOON_PA_DE403 = 31002 FRAME_31002_NAME = 'MOON_PA_DE403' FRAME_31002_CLASS = 2 FRAME_31002_CLASS_ID = 31002 FRAME_31002_CENTER = 301 \begintext MOON_ME_DE403 is the name of the lunar mean Earth/polar axis reference frame defined by JPL's DE-403 planetary ephemeris. Rotation angles are from reference [1]. \begindata FRAME_MOON_ME_DE403 = 31003 FRAME_31003_NAME = 'MOON_ME_DE403' FRAME_31003_CLASS = 4 FRAME_31003_CLASS_ID = 31003 FRAME_31003_CENTER = 301 TKFRAME_31003_SPEC = 'ANGLES' TKFRAME_31003_RELATIVE = 'MOON_PA_DE403' TKFRAME_31003_ANGLES = ( 63.8986 79.0768 0.1462 ) TKFRAME_31003_AXES = ( 3, 2, 1 ) TKFRAME_31003_UNITS = 'ARCSECONDS' \begintext Updating this Kernel -------------------- When a new JPL DE providing lunar rotation data becomes available, the new lunar PA frame associated with that data set will be named MOON_PA_DEnnn where nnn is the version number of the DE. The PCK body ID code associated with that data set will be 31004 The frame ID and class ID for this frame will also be 31004. The generic PA frame specification will be updated to point to the new DE-specific PA frame. The rest of this frame specification is unchanged. The ME frame name associated with the new data set will be named MOON_ME_DEnnn The frame ID and class ID for this frame will be 31005 The rotational offset between this frame and the new DE-specific PA frame will need to be updated; this offset is DE-dependent. The generic ME frame specification will be updated to point to the new DE-specific ME frame. The rest of this frame specification is unchanged. ===================================================================== End of kernel