KPL/FK

JUICE DSK Surfaces ID Codes
========================================================================

   This frame kernel contains a set of JUICE mission DSK Surface ID
   Codes for the JUICE Spacecraft and the Jupiter IO Plasma Torus.


Version and Date
========================================================================

   Version 0.3 -- September 25, 2020 -- Marc Costa Sitja, ESAC/ESA

      Updated JUICE_IO_PLASMA_TORUS_V01 body ID.

   Version 0.2 -- March 4, 2019 -- Marc Costa Sitja, ESAC/ESA

      Changed MGA Boom definition to MGA APM.

   Version 0.1 -- October 29, 2019 -- Marc Costa Sitja, ESAC/ESA

      Added MAG Boom, MGA Boom and MGA surface definitions.

   Version 0.0 -- October 16, 2018 -- Marc Costa Sitja, ESAC/ESA

      First version.


References
========================================================================

   1. ``Frames Required Reading''

   2. ``Kernel Pool Required Reading''

   3. ``DS-Kernel Required Reading''

   4. JUICE Frames Kernel.


Contact Information
------------------------------------------------------------------------

   If you have any questions regarding this file contact the
   ESA SPICE Service at ESAC:

           Marc Costa Sitja
           (+34) 91-8131-457
           marc.costa@esa.int, esa_spice@sciops.esa.int

   or NAIF at JPL:

           Boris Semenov
           (818) 354-8136
           Boris.Semenov@jpl.nasa.gov


Implementation Notes
========================================================================

   This file is used by the SPICE system as follows: programs that make
   use of this frame kernel must `load' the kernel, normally during
   program initialization. The SPICELIB routine FURNSH and CSPICE
   function furnsh_c load a kernel file into the kernel pool as shown
   below.

      CALL FURNSH ( 'frame_kernel_name' )
      furnsh_c    ( "frame_kernel_name" );

   This file was created and may be updated with a text editor or word
   processor.


Definition Section
========================================================================

   This section contains name to ID mappings for the JUICE mission 
   DSK surfaces. These mappings are supported by all SPICE toolkits 
   with integrated DSK capabilities (version N0066 or later).

  JUICE Spacecraft Surface name/IDs:

          DSK Surface Name          ID    Body ID
      ===========================  =====  =======

      JUICE_SC_BUS                -28000   -28000
      JUICE_SC_SA+Y               -28011   -28011
      JUICE_SC_SA-Y               -28013   -28013
      JUICE_SC_MAG_BOOM           -28031   -28031
      JUICE_SC_MGA_APM            -28040   -28040
      JUICE_SC_MGA                -28044   -28044

   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME    += 'JUICE_SC_BUS'
      NAIF_SURFACE_CODE    += -28000
      NAIF_SURFACE_BODY    += -28000

      NAIF_SURFACE_NAME    += 'JUICE_SC_SA+Y'
      NAIF_SURFACE_CODE    += -28011
      NAIF_SURFACE_BODY    += -28011

      NAIF_SURFACE_NAME    += 'JUICE_SC_SA-Y'
      NAIF_SURFACE_CODE    += -28013
      NAIF_SURFACE_BODY    += -28013

      NAIF_SURFACE_NAME    += 'JUICE_SC_MAG_BOOM'
      NAIF_SURFACE_CODE    += -28031
      NAIF_SURFACE_BODY    += -28031

      NAIF_SURFACE_NAME    += 'JUICE_SC_MGA_APM'
      NAIF_SURFACE_CODE    += -28040
      NAIF_SURFACE_BODY    += -28040

      NAIF_SURFACE_NAME    += 'JUICE_SC_MGA'
      NAIF_SURFACE_CODE    += -28044
      NAIF_SURFACE_BODY    += -28044

   \begintext


   Jupiter Io Plasma Torus name/IDs:

          DSK Surface Name          ID      Body ID
      ===========================  =====    =======

      JUICE_IO_PLASMA_TORUS       -28968    -28968


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME   += 'JUICE_IO_PLASMA_TORUS'
      NAIF_SURFACE_CODE   += -28968
      NAIF_SURFACE_BODY   += -28968

   \begintext


End of FK file.