KPL/FK ExoMars2016 Target Body DSK Surface ID Codes ======================================================================== This frame kernel contains a set of ExoMars2016 Target Body DSK Surface ID Codes for Phobos, Deimos, Mars and the TGO spacecraft. Version and Date ------------------------------------------------------------------------ Version 0.4 -- May 10, 2023 -- Alfredo Escalante Lopez, ESAC/ESA Added Surface ID definitions for corrected Deimos model. Version 0.3 -- April 24, 2020 -- Ricardo Valles Blanco, ESAC/ESA Fixed typos for PDS4 Bundle release Version 2.0, and updated contact information. Version 0.2 -- April 24, 2020 -- Marc Costa Sitja, ESAC/ESA Added new surfaces for Phobos: PHOBOS_M003_GAS_V01 and PHOBOS_K275_DLR_V02. Version 0.1 -- March 4, 2020 -- Marc Costa Sitja, ESAC/ESA Added TGO S/C-related Surfaces and IDs. Version 0.0 -- January 4, 2019 -- Marc Costa Sitja, ESAC/ESA First version. References ------------------------------------------------------------------------ 1. ``Frames Required Reading'' 2. ``Kernel Pool Required Reading'' 3. ``DS-Kernel Required Reading'' 4. TGO Frames Kernel. Contact Information ------------------------------------------------------------------------ If you have any questions regarding this file contact SPICE support at ESAC: Alfredo Escalante Lopez (+34) 91-8131-429 spice@sciops.esa.int, or SPICE support at IKI: Alexander Abbakumov +7 (495) 333-40-13 aabbakumov@romance.iki.rssi.ru or NAIF at JPL: Boris Semenov +1 (818) 354-8136 Boris.Semenov@jpl.nasa.gov Implementation Notes ------------------------------------------------------------------------ This file is used by the SPICE system as follows: programs that make use of this frame kernel must "load" the kernel normally during program initialization. Loading the kernel associates the data items with their names in a data structure called the "kernel pool". The SPICELIB routine FURNSH loads a kernel into the pool as shown below: FORTRAN: (SPICELIB) CALL FURNSH ( frame_kernel_name ) C: (CSPICE) furnsh_c ( frame_kernel_name ); IDL: (ICY) cspice_furnsh, frame_kernel_name MATLAB: (MICE) cspice_furnsh ( 'frame_kernel_name' ) PYTHON: (SPICEYPY)* furnsh( frame_kernel_name ) In order for a program or routine to extract data from the pool, the SPICELIB routines GDPOOL, GIPOOL, and GCPOOL are used. See [2] for more details. This file was created and may be updated with a text editor or word processor. * SPICEYPY is a non-official, community developed Python wrapper for the NAIF SPICE toolkit. Its development is managed on Github. It is available at: https://github.com/AndrewAnnex/SpiceyPy Definition Section ------------------------------------------------------------------------ This section contains name to ID mappings for the ExoMars2016 target body DSK surfaces. These mappings are supported by all SPICE toolkits with integrated DSK capabilities (version N0066 or later). TGO Spacecraft Surface name/IDs: DSK Surface Name ID Body ID =========================== ======= ======== TGO_SC_BUS -143000 -143000 TGO_SC_SA+Z -143011 -143011 TGO_SC_SA-Z -143013 -143013 TGO_SC_HGA -143025 -143025 Name-ID Mapping keywords: \begindata NAIF_SURFACE_NAME += 'TGO_SC_BUS' NAIF_SURFACE_CODE += -143000 NAIF_SURFACE_BODY += -143000 NAIF_SURFACE_NAME += 'TGO_SC_SA+Z' NAIF_SURFACE_CODE += -143011 NAIF_SURFACE_BODY += -143011 NAIF_SURFACE_NAME += 'TGO_SC_SA-Z' NAIF_SURFACE_CODE += -143013 NAIF_SURFACE_BODY += -143013 NAIF_SURFACE_NAME += 'TGO_SC_HGA' NAIF_SURFACE_CODE += -143025 NAIF_SURFACE_BODY += -143025 \begintext Mars Satellite Phobos Surface name/IDs: DSK Surface Name ID Body ID =========================== ===== ======= PHOBOS_M157_GAS_V01 14011 401 PHOBOS_M003_GAS_V01 14012 401 PHOBOS_K137_DLR_V01 10041 401 PHOBOS_K275_DLR_V02 10042 401 Name-ID Mapping keywords: \begindata NAIF_SURFACE_NAME += 'PHOBOS_M157_GAS_V01' NAIF_SURFACE_CODE += 14011 NAIF_SURFACE_BODY += 401 NAIF_SURFACE_NAME += 'PHOBOS_M003_GAS_V01' NAIF_SURFACE_CODE += 14012 NAIF_SURFACE_BODY += 401 NAIF_SURFACE_NAME += 'PHOBOS_K137_DLR_V01' NAIF_SURFACE_CODE += 10041 NAIF_SURFACE_BODY += 401 NAIF_SURFACE_NAME += 'PHOBOS_K275_DLR_V02' NAIF_SURFACE_CODE += 10042 NAIF_SURFACE_BODY += 401 \begintext Mars Satellite Deimos Surface name/IDs: DSK Surface Name ID Body ID =========================== ===== ======= DEIMOS_K002_THO_V01 14020 402 DEIMOS_K005_THO_V02 14021 402 Name-ID Mapping keywords: \begindata NAIF_SURFACE_NAME += 'DEIMOS_K002_THO_V01' NAIF_SURFACE_CODE += 14020 NAIF_SURFACE_BODY += 402 NAIF_SURFACE_NAME += 'DEIMOS_K005_THO_V02' NAIF_SURFACE_CODE += 14021 NAIF_SURFACE_BODY += 402 \begintext End of FK file.