Instructions for Importing the CSPICE Toolkit =========================================================================== This document describes how to import the CSPICE package on SUN computers using SOLARIS operating system and SUN C 64BIT compiler. We recommend that at a minimum you look over the sections "System Requirements" and "Importing the CSPICE Package" before you begin importing the CSPICE package. We also strongly recommend that you not try to port this package to any other environment without first consulting NAIF. By saying "porting" we mean trying to build this package on a different computer hardware or operating system type, or using a different compiler brand or a different version of the compiler used to build this package, or changing any compile options, such as optimization level, that are used in the script(s) building the libraries included in this package. Detailed information about the system on which this package was compiled and tested is provided in the section "Recompiling the Toolkit" below. In addition to this document there are two text files provided with this package that may be of interest: dscriptn.txt contains a description of the directory structure and contents of the CSPICE package. whats.new describes new features available in this version of the CSPICE package. System Requirements -------------------------------------------------------- Before you begin importing the CSPICE package, you should make sure that you have approximately 150 Megabytes of free diskspace. After the toolkit has been imported you can delete the file cspice.tar to free up approximately half of the space used during the installation. Time for Importing. The amount of time required to perform the import varies, but importing typically takes a few minutes. If you already have a CSPICE Package You should backup and move (or remove) any previous editions of the CSPICE Package from the directory where you plan to import this toolkit. Otherwise this toolkit may be merged with the previous edition leading to unpredictable results. Importing the CSPICE Package -------------------------------------------------------- You should move the following files to the directory where you want to import the CSPICE Package. cspice.tar.Z importCSpice.csh (Note: If you are copying the ".tar.Z" file via ftp you should copy it in "binary" mode. Use "ascii" mode to copy the ".csh" file.) Now type the following command. /bin/csh -f importCSpice.csh The script importCSpice.csh will uncompress and untar the toolkit and, on platforms where NAIF anticipates that it is necessary, compile and link all source code products. If you experience problems with the import process, first refer to the section at the end of this document entitled "Importing Problems". If you can't resolve the import problem there, contact NAIF for assistance. Additional Instructions -------------------------------------------------------- For CSPICE users additional instructions regarding linking their applications to the CSPICE library are provided in the CSPICE Required Reading document -- ``doc/cspice.req'' (plain text format) and ``doc/html/req/cspice.html'' (HTML format) included in the package. Toolkit Documentation -------------------------------------------------------- The Toolkit contains two styles of documentation: a plain text version and a hyperlinked html version. NAIF recommends you use the html version because of the convenience of the hyperlinking. To do that load the top level index of the html documentation -- cspice/doc/html/index.html -- into a web browser. Recompiling the Toolkit -------------------------------------------------------- All libraries and executable programs in this package have been pre-compiled and built for your convenience. Usually it is not necessary to recompile them after you have imported the Toolkit -- you can link to the libraries and run the executables ``as is''. In some cases though, for example if you are using an earlier version of the same compiler and/or operating system, it may be necessary to re-build the Toolkit. To recompile all libraries and programs provided in this package, change to the top level directory and run the ``makeall.csh'' script as follows: /bin/csh -f makeall.csh If you experience problems performing thus(se) operation(s), contact NAIF for further assistance. This package has been pre-compiled on a Sun Blade 1000 workstation running Solaris 10 using Sun Studio 12.6 Sun C 5.15 (2017/05/30) compiler in 64-bit mode. The version of Java installed on this workstation was 1.8. Disclaimer -------------------------------------------------------- THIS SOFTWARE AND ANY RELATED MATERIALS WERE CREATED BY THE CALIFORNIA INSTITUTE OF TECHNOLOGY (CALTECH) UNDER A U.S. GOVERNMENT CONTRACT WITH THE NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA). THE SOFTWARE IS TECHNOLOGY AND SOFTWARE PUBLICLY AVAILABLE UNDER U.S. EXPORT LAWS AND IS PROVIDED "AS-IS" TO THE RECIPIENT WITHOUT WARRANTY OF ANY KIND, INCLUDING ANY WARRANTIES OF PERFORMANCE OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE (AS SET FORTH IN UNITED STATES UCC SECTIONS 2312-2313) OR FOR ANY PURPOSE WHATSOEVER, FOR THE SOFTWARE AND RELATED MATERIALS, HOWEVER USED. IN NO EVENT SHALL CALTECH, ITS JET PROPULSION LABORATORY, OR NASA BE LIABLE FOR ANY DAMAGES AND/OR COSTS, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING ECONOMIC DAMAGE OR INJURY TO PROPERTY AND LOST PROFITS, REGARDLESS OF WHETHER CALTECH, JPL, OR NASA BE ADVISED, HAVE REASON TO KNOW, OR, IN FACT, SHALL KNOW OF THE POSSIBILITY. RECIPIENT BEARS ALL RISK RELATING TO QUALITY AND PERFORMANCE OF THE SOFTWARE AND ANY RELATED MATERIALS, AND AGREES TO INDEMNIFY CALTECH AND NASA FOR ALL THIRD-PARTY CLAIMS RESULTING FROM THE ACTIONS OF RECIPIENT IN THE USE OF THE SOFTWARE. How to Contact NAIF -------------------------------------------------------- If you have problems or suggestions you can contact NAIF via U.S. Mail, electronic mail or phone as specified below. U.S. Mail address: Boris Semenov Jet Propulsion Laboratory Navigation Ancillary Information Facility 4800 Oak Grove Drive Mail Stop 301-125L Pasadena, CA 91109 Electronic mail address: Matthew.J.Barnes@jpl.nasa.gov Nathaniel.J.Bachman@jpl.nasa.gov Marc.Costa.Sitja@jpl.nasa.gov Boris.V.Semenov@jpl.nasa.gov Fraser.S.Thomson@jpl.nasa.gov Edward.D.Wright@jpl.nasa.gov Phone number: (818) 354-7454 (Nat Bachman) (818) 354-5942 (Matt Barnes) (818) 354-4852 (Marc Costa) (818) 354-8136 (Boris Semenov) (818) 354-1842 (Fraser Thomson) (818) 354-0371 (Ed Wright) Importing Problems -------------------------------------------------------- Although the import script does not make a lot of assumptions about your computing environment, it must make a few. Importing problems usually occur because one of these assumptions is not met by the system where the CSPICE package is being imported. Shell Prompt In several examples below, we will talk about interacting with the UNIX shell. We shall assume that the shell prompts you for input by displaying the string: myprompt> What your system displays will almost certainly be different. UNIX SHELL It is assumed that you have the UNIX C-shell installed on your machine and that it is the normal shell you use when working on your system. It is easy to determine if this is in fact the case. At the shell prompt type: myprompt> echo $shell If you are using the C-shell, you should see the following message on your screen. /bin/csh If your process responds with some other message, then either you are not using the C-shell, or its not in the expected location. To see if you have the C-shell available on your system type the following command. myprompt> ls -1 /bin/csh You should get the following response from your process. /bin/csh* If you don't get this, your system doesn't satisfy the import script assumptions. You can't import the CSPICE package using these instructions. uncompress and tar The CSPICE package is delivered via a compressed "tar" file. You must have the "uncompress" and "tar" program present on your system to import the toolkit. You can find out if you have these programs by typing: mypropmt> which uncompress myprompt> which tar Your system should respond with messages similar to the following /bin/uncompress /bin/tar If it doesn't you won't be able to extract the toolkit from the "tar" file. C compiler It is assumed that you have a working ANSI C compiler and that your environment is set up so that you can simply type "cc" to invoke the compiler. Moreover, it is assumed that "cc" is not an alias. You can determine whether or not "cc" is an alias for some other command by typing: myprompt> alias cc If cc is an not an alias, the shell responds by re-issuing the shell prompt. In this case you've passed the last hurdle and you should be ready to import the CSPICE package. If "cc" is an alias, how "cc" is aliased will be displayed. In this case you need to perform the following two commands. myprompt> unalias cc myprompt> which cc The second command should yield a fully qualified path for your C compiler. If it doesn't you need to find out which directory contains the C compiler and add this directory to your path.