PDS_VERSION_ID          = PDS3
RECORD_TYPE             = STREAM

OBJECT                  = TEXT
   INTERCHANGE_FORMAT   = ASCII
   PUBLICATION_DATE     = 2008-05-18
   NOTE                 = "Cassini specific EK Documents"
END_OBJECT              = TEXT

END


Cassini specific EK documentation
=================================================

   The Cassini project has produced several documents that describe
   Cassini-specific use of E-Kernels, including the Software Interface
   Specification document and the SEQGEN User's Guide, which describes
   subsystem status information.

   The files provided in this directory are listed below:

       inspekt.asc             is an INSPEKT startup script containing
                               example kernel load commands and INSPEKT
                               configuration. It also includes queries
                               that were found to be useful during
                               the mission.

       inspekt.lbl             is the PDS label for inspekt.asc document.

       seqgen_users_guide.pdf  is the seqgen software user's guide
                               defines the subsystem status parameters
                               provided in the CASSINI_STATUS table.

       seqgen_users_guide.asc  is the text version of above document.

       seqgen_users_guide.lbl  is the PDS label for seqgen users guide
                               documents.

       sis_ek_001_revc.pdf     is the software interface specification
                               that defines the tables, their columns
                               and the relationship between tables.

       sis_ek_001_revc.asc     is the text version of above document.

       sis_ek_001_revc.lbl     is the PDS label for EK SIS documents.


Usage Note
==============

   The INSPEKT SPICE utility program script "inspekt.asc" eases the
   viewing of the contents of Cassini SPICE Event Kernel (EK) files by
   defining multiple macro commands for extracting data from the EK files.
   They are designed to provide examples which can be used as a guide
   for the user to create custom macros.

   Starting the INSPEKT program
   --------------------------------------------------------
   Prompt> inspekt -start inspekt.asc
   or
   Prompt> inspekt
       Inspekt> start inspekt.asc;

         Note:

         1) Commands may extend over multiple lines but  ALL commands
            must end with a semi-colon.

         2) To leave the program type "exit;".

         3) To get a summary of commands type "help;".

   What does the "inspekt.asc" script contain?
   --------------------------------------------------------
   It contains a set of INSPEKT commands that could be typed and executed
   from INSPEKT's command line interactively. All these commands are
   executed by Inspekt when the script is loaded.   Commands in the
   "inspekt.asc" script can be divided into four categories.

       Loading files
       Defining aliases for tables
       Environment Configuration
       Macro commands


Contact Information
===================

   Regarding Cassini project specific information provided in this data
   set and for general information about SPICE system:

      Lee Elson
      (818)-354-4223
      Lee.Elson@jpl.nasa.gov

   or

      Boris Semenov
      (818)-354-8136
      Boris.Semenov@jpl.nasa.gov

   address:

      Navigation and Ancillary Information Facility (NAIF)
      Jet Propulsion Laboratory
      MS 301-125L
      4800 Oak Grove Drive
      Pasadena CA 91109 USA